1)TF-TIM01 can used with TF-CNT control card and some big control card.

2)When connected with RS232,the max distance is 100 meters,when connected with RS485,the max distance is 1000 meters.

3)Remote function.you can use the remote-control unit to select which program to play,change another program to play,brightness play,screen switch.

4)TF-TIM01 its own have buttons,that can control the No.1 count area,count start,pause,resset;At the same time,that can select the last and next program to play(function as TF-RMT01)

2.Hardware connection diagram and the button function

1)the RS232 connection is 2,3,5,9pin(2 and 3 cross)
（(Note:the power get throght the serial port,so that you cannot pull off and on when power on)）

2) the first line,three buttons are“Start”“Pause”“Reset”，the other two buttons are“the last program”“the next program”

3.Program edit

1)“the software”PowerLED”→menu→“tools”→“Add special area”→“Counter”,serial number defaults to 1.

2)Click”send” ,send the programs to control card.